¢Ã Product Overview
• Are you having trouble with StarGazer¢â?
• The first-time users might face difficulty when they try to understand the StarGazer¢â, due to unfamiliarity with the communication protocol of the StarGazer¢â.
• Here is the StarGazer Indicator¢â, a useful tool which helps the first-time users to operate the StarGazer¢â without a hassle. The Indicator shows a variety of information that is transmitted from the StarGazer¢â through LCD window.
¢Ã Specifications
• Power : DC +5V.
• Communication Protocal : RS232C (TTL Level)
• Communication Specification : Baudrate : 115200
Databits : 8bits
Stopbits : 1bit
Parity : None
• LCD Indicator : 16 x 2 CLCD
• Temperature : -55¡É ~ +125 ¡É
•Dimension : 112(W) x 32(L) x 32(H)
¢Ã Features
• Data from StarGazer¢â can be displayed directly through LCD.
• Data from StarGazer¢â can be filtered that only a wanted data can be shown.
•Buzzer is built-in that user can turn on or off.
¢Ã Product Components
¢Ã Product Description
1. Hardware Configuration
¨ç CLCD Panel : Data transmitted from Stargazer¢â is shown.
¨è RxD LED : LED is flickering during reception of data.
¨é PWR LED : LED is on while power is on.
¨ê Control Keys : Indicator¢â Control Buttons.
¨ë Power and Communication Connector : Please connect as below.
¨ì Power Switch(On/Off) : The red-marked is ON switch.
¨í LCD Variable Resistance : It controls the power of LCD indication. (Setting is completed from factory)
2. How to operate Control Keys
¨ç M (Menu) : to move to other menu.
¨è E (Enter) : to select the menu. Also used to remove Buzzer sound.
¨é ¢º (Right) : After Menu button, users can scroll to the right. Also, users can select Buzzer sound.
¨ê ¢¸ (Left) : After Menu button, users can scroll to the left.
3. Mode description (Please see Protocol to see the output data of StarGazer¢â)
¨ç Mode Number 1 : Pure Communication datas mode
¡æ The output data of StarGazer¢â is shown on the LCD without any filtration.
¡æ Users can see data by using the right or left scroll.
¨è Mode Number 2 : Communication informations
¡æ The output data of StarGazer¢â is filtered and is shown on the LCD in the order of ID, X, Y and Angle.
¡æ Users can see data by using the right or left scroll.
¨é Mode Number 3 : System information
¡æ Users can see the default communication setting of StarGazer¢â.
¡æ In addition, pressing button one more time allows users to set up Buzzer.
¡æ After Buzzer setup, please push the Enter button to finish the setting.
4. The Communication Protocol of StarGazer¢â
Data from StarGazer¢â
(The digits of the angles, X, and Y values are variable
depending on the value two decimal places or less are fixed)
Ex 1) MAP/Alone Mode
Communication Data : ~^I+150.23|-33.12|+12.00|64`
Data Value : Angle = +150.23
X = -33.12
Y = +12.00
ID = 64
Ex 2) MAP Building Mode
Communication Data : ~^F+150.23|-33.12|+12.00|64`
Data Value : Angle = +150.23
X = -33.12
Y = +12.00
ID = 64
- Map-building Mode : to make a map under single coordinate system. The placement of a reference ID becomes an origin.
- Map Mode : a system operates under one coordinate system defined by regarding the placement of a reference ID as an origin after map-building process.
<¡°The indicator is a part used on the StarGazer¢â or StarGazer¢â RS1.0.
If you want to connect in serial to your PC and receive data,
you don't need to purchase this product.¡±>
|